A good extension lighting plan is settled before the plasterer arrives, not after. Decide where daylight comes in, split the artificial light into layers (ambient, task, accent), then fix every circuit, switch and fitting position on the drawings so the electrician first-fixes the right cable in the right place. Leave it late and you end up with spotlights in the wrong spots and no power where the island pendants need to hang.
This guide walks through that process in order, with a worked kitchen-diner example, written for homeowners planning an extension in Birmingham, Solihull and the wider West Midlands.
TL;DR
- Plan daylight first: rooflights, glazed doors and window positions decide how much artificial light you will ever need.
- Use three layers: ambient, task and accent, each on its own circuit and dimmer so one room can change mood.
- Fix cable positions, switch locations and fitting types on the electrical drawings before first fix. Moving them afterwards costs time and plaster.
- Choose efficient fittings: Building Regulations expect fixed lighting in new dwellings and extensions to meet an efficacy standard, and outdoor lights need controls.
- Ask your builder to coordinate glazing, electrics and finishes as one package, so nothing is designed in isolation.
Table of Contents
- Start with daylight, not light fittings
- Rooflights, lanterns and glazed doors
- Think in three layers
- Colour temperature and brightness
- Worked example: a kitchen-diner extension
- Switching, circuits and dimmers
- What the regulations expect
- Lighting plans for different extension types
- Our perspective
- Plan your extension lighting with one team
- Common lighting mistakes to avoid
- A simple step-by-step process
- FAQ
- Sources
Start with daylight, not light fittings
Every lighting plan starts with where the sun comes in. A rear extension on a typical Birmingham semi or terrace usually has one big problem: it adds depth, and the middle of that new room sits a long way from any window. Artificial light can fix the evening, but only glazing fixes the middle of a grey November afternoon.
Three questions shape the daylight plan:
- Which way does the extension face? A south or west-facing rear gets strong light and heat gain, which affects glazing choice and blinds. A north-facing one needs more glass to feel bright.
- How deep is the room? Past roughly the length of a normal room from the glazing, daylight drops off quickly. Deep plans benefit from roof glazing over the middle, not just doors at the end.
- What is outside? Boundary walls, a neighbour's gable or a tall fence can swallow side light. This is also where right to light can matter, because new walls can affect a neighbour's established daylight.
Only once you know where the daylight lands can you see where it won't, and that gap is what artificial light has to fill.
Rooflights, lanterns and glazed doors
Rooflights are the most effective way to bring light into the heart of a deep extension, because overhead glass admits far more light than the same area in a wall. The choice is usually between flat rooflights (sometimes called skylights) and a roof lantern.
| Option | Best for | Lighting effect | Things to settle early |
|---|---|---|---|
| Flat rooflight | Flat roofs, narrow side returns, kitchen worktops | Direct overhead light, strong in the middle of the room | Position over the island or table, blinds, solar gain |
| Roof lantern | Larger open-plan rooms, a feature ceiling | Softer, spread light and a focal point | Upstand height, structure, how it looks from inside at night |
| Glazed doors (bifold or sliding) | Rear walls opening onto the garden | Wide side-on daylight and a view | Frame width, threshold, how deep the light reaches |
| Corner or high-level windows | Tight plots, privacy near boundaries | Light without overlooking | Placement against kitchen units |
If you are weighing the first two, our guide to roof lanterns versus skylights covers the UK rules and the height limits that apply. For the garden wall, see bifold versus sliding doors, since the frame sizes change how much of your wall is actually glass.
Two lighting points people miss with rooflights:
- A rooflight needs a night plan. At night a black glass ceiling reflects the room back at you. Lights that sit flush in a plasterboard ceiling beside the glass, or wall lights that wash the surfaces, look far better than a single central fitting.
- Plan the blinds and power. Motorised blinds or vents need a spur and a switch position. Add them to the electrical drawing, not as an afterthought.
Think in three layers
For a room that works from breakfast to late evening, use three layers of artificial light. Each should be controllable on its own.
Ambient light
This is the general background light. In an extension it is usually recessed downlights or a few surface fittings across the ceiling. Keep the spacing even and avoid a dense grid: too many downlights make a room feel like a shop and leave you with dozens of holes in the ceiling to maintain. Place them to wash walls and clear the rooflight edges, not just to fill squares.

Task light
This is the focused light for work. In a kitchen that means light under wall units for the worktops, a pendant or two over the island, and bright, shadow-free light over the hob and sink. Standing at a counter with your back to a ceiling downlight puts your own shadow on the work, so the task layer matters more than the ambient one in a kitchen.

Accent light
This is the light that makes the room feel finished: a lit alcove, a picture light, LED strip in a shelf or plinth, wall lights by a sofa, and low lighting for the garden doors. Accent light is cheap to plan and awkward to retrofit, because it needs cable routes in walls and joinery. Decide it with the kitchen designer and joiner, not the electrician alone.
Colour temperature and brightness
Mixing colours is the commonest visible mistake. Keep a single colour temperature across the extension and the room it opens into, or the join will show.
- Warm white (about 2700K) suits living and dining areas and is easy on the eye in the evening.
- Warm to neutral (about 3000K) is a safe middle for an open-plan kitchen-diner, bright enough to work in and still cosy.
- Cooler light (4000K) suits utility rooms and workspaces, but can feel harsh in a family area.
Look for a high colour rendering figure (CRI 90 or more) on kitchen and dining fittings so food and finishes look natural. Dimmable fittings need matching dimmers, so tell your electrician the exact fittings before the switches are chosen.
Worked example: a kitchen-diner extension
Take a rear extension that opens a Victorian terrace kitchen into a garden room, roughly 6m by 4m, with sliding doors across the back and two rooflights over the middle. This is a typical layout, not a quote.
| Zone | Daylight | Artificial light | Circuit / switching |
|---|---|---|---|
| Kitchen worktops | Rooflight above, doors to the side | Under-unit LED, a few ceiling spots | Own circuit, switched by the cook's position |
| Island | Rooflight above | Two or three pendants on a dimmer | Separate dimmer, ceiling box fixed in the right place |
| Dining table | Doors, side light | One feature pendant, centred on the table | Dimmer, with the box located from the furniture plan |
| Sitting area | Doors | Wall lights, floor lamp sockets | Switched sockets on a dimmer |
| Garden doors | Direct | Outside wall light, step lights | Daylight or timer control |
Notice what drives it: the pendant boxes only work if the table and island positions are fixed first. That is why a lighting plan and a kitchen layout are one job. Our guide to kitchen-diner extension layouts shows how to fix furniture and unit positions early, and the open plan kitchen extension example shows how the pieces fit into one budget.
Switching, circuits and dimmers
A plan lives or dies on its switching. Aim for:
- Separate circuits for each layer. Ambient, task and accent should not all go on one switch.
- Switches where you walk. Put one by each entrance, including the garden doors, and use two-way switching if the extension has two ways in.
- Dimmers for the main living areas. Check the dimmer suits the fittings, particularly with LED.
- Plenty of sockets at the right height. Floor sockets or island sockets need floor build-up decided early.
- Smart control, if wanted. Decide before first fix whether you want app or voice control, because it changes the wiring.
This detail goes onto an electrical layout drawing that you sign off before the walls are boarded. Ask for the positions to be marked on the wall with chalk or tape and walk through them with your builder and electrician.
What the regulations expect
Lighting in an extension is not purely a style choice. Under the energy efficiency rules for England, fixed internal lighting in new and existing dwellings is expected to be efficient, with a light source efficacy of 75 light source lumens per circuit-watt, and fixed outdoor lighting needs automatic controls that switch it off in daylight. Modern LED fittings generally meet this, but check the specification of anything decorative.
A few more points to raise with your design team:
- Electrical work in a home has to meet Building Regulations, and your extension's building control sign-off will include it. Use a competent registered electrician and keep the certificates.
- Rooflights and glazing also count in the energy calculation for the extension, so the glazing choice and the lighting plan should be settled together.
- Fire safety, such as the position of smoke and heat alarms, belongs on the same drawing as the lighting.
Your lighting plan and glazing positions also appear on the drawings sent for approval, so it helps to read our guide to extension planning drawings so you know which drawings you need and what each should show.
Lighting plans for different extension types
Side-return extensions
Narrow and often dark, because the neighbour's wall runs along one side. Use a long strip of rooflight along the wall to wash it with light, then keep the artificial light low-key: under-cabinet task light and a couple of pendants. Wall-wash lighting turns the boundary wall into a feature.
Wrap-around and L-shaped extensions
The bend makes the room feel like two zones, so use lighting to join them: matching pendants, one colour temperature and a rooflight at the corner. Our L-shaped extension design guide covers how the plan shape affects the garden and the light.
Double-storey extensions
The ground floor may lose light to the floor above if there is no rooflight, so plan glazing in the rear and side walls, and use the landing and stairwell as light routes. Check the two-storey extension rules before fixing window positions.
Small kitchen extensions
In a compact room every fitting counts. Pick a rooflight over the worktop, under-unit lighting and a single pendant, and keep colours consistent. Our small kitchen extension ideas article has more layouts.
Our perspective
Most lighting problems we see in extensions are really coordination problems. The rooflight is drawn by one person, the kitchen by another and the electrics by a third, and nobody checks that the pendant box lands over the island.
That is why we run design, planning, building regulations and construction as one managed process with one team. The lighting plan is settled on the same drawings as the glazing and the kitchen layout, before work starts on site, so changes are made on paper where they cost nothing.
Our advice is simple: agree your daylight sources first, give each light layer its own switching, and sign off the electrical layout with a chalk walk-through before first fix. Done in that order, lighting is one of the cheapest ways to make an extension feel finished.
Raja
Plan your extension lighting with one team
If you are planning a kitchen-diner, rear, side-return, wrap-around or double-storey extension in the West Midlands, we handle the design, planning, building regulations and build under one team, with realistic budget guidance before any site survey. That means your rooflights, glazing and lighting layout are decided together, not passed between separate firms. Start on our extension design and build services page to tell us about your home.

If you are comparing how the cost builds up, our extension costs guide for the West Midlands explains what goes into a budget, including over-garage projects.
Common lighting mistakes to avoid
- Too many downlights. A grid of spots looks flat and creates glare on glass. Fewer, well-placed fittings with other layers work better.
- One switch for everything. A single switch gives you full brightness or darkness, nothing in between.
- Ignoring the rooflight at night. Plan wall and low-level light so the glass doesn't become a black mirror.
- Choosing pendants last. Pendant boxes, joists and ceiling structure need to be fixed in the design stage.
- Mixed colour temperatures. Keep one colour across open-plan spaces.
- Forgetting the garden. Plan external lights at the garden doors, steps and side access, with controls that meet the rules above.
A simple step-by-step process
- Mark where daylight enters and where the room stays dark.
- Choose rooflights and glazing to fix the dark areas.
- Draw furniture and kitchen units on the plan.
- Place task light first, then ambient, then accent.
- Group each layer onto its own switch or dimmer.
- Mark sockets, spurs for blinds and external lights.
- Check fittings against the efficacy and control rules.
- Walk the marked-up walls with your builder and electrician before first fix.
FAQ
How many downlights do I need in an extension?
There is no fixed number, because it depends on the ceiling height, room size and how much daylight there is. As a starting point, space fittings evenly and use them to wash walls rather than to fill the ceiling. Add task and accent layers so the downlights are not doing all the work.
Do rooflights replace the need for artificial lighting?
No. They bring in daylight during the day, which cuts how much you need, but you still need a lighting plan for evenings and dull days. Plan lights that work alongside the glass, such as wall lights and ceiling fittings beside the rooflight.
Should I choose warm or cool white for an extension?
For a kitchen-diner or living space, warm white to neutral (about 2700K to 3000K) is the usual choice. Use the same colour throughout open-plan areas. Cooler light suits a utility room or workspace.
When should the lighting plan be finished?
Before first fix electrics, and ideally on the drawings before work starts. Fixing cable and switch positions after the walls are boarded means opening up and making good.
Do I need building regulations approval for lighting in an extension?
Electrical work in your extension must comply with Building Regulations, and fixed lighting is expected to meet the efficacy standard, so it is covered by the building control sign-off. Your builder should arrange this and provide the electrical certificate.
